Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 23 Page 24 Page 25 Page 26 Page 27 Page 28 Page 29 Page 30 Page 31 Page 32 Page 33 Page 34 Page 35 Page 36 Page 37 Page 38 Page 39 Page 40 Page 41 Page 42 Page 43 Page 44 Page 45 Page 46 Page 47 Page 48 Page 49 Page 50 Page 51 Page 52 Page 53 Page 54 Page 55 Page 56Oil Handling Manual Pumps Not to be used with Chemicals, Petrol, other Corrosive or Volatile Liquids unless specified. Do not test pumps with water. Keep pumps well oiled when not in use. J3016D2 For 205Ltr drum. 16 Lever Drum Pump High output lever action. Oil and Anti-freeze pump. 400cc per stroke (approx.). Extra strong. Telescopic tube. Anti drip filter cap. Optional extra: Above pump supplied with ‘S’ (J2650/S) adaptor that clamps on to most male treads. J3016/48 For 4’ tank. J3016/25 For 20/25Ltr drum. J3016/25SE As above for 20/25Ltr drums c/w J2650/S convertor for male threaded drums. J3016/25KIT J3016/25SE c/w 1.5m outlet hose with shut off valve and nozzle. A1025SE 1.5m outlet hose with shut off valve and nozzle. Gear Oil ‘Stirrup’ Pump With 1.7m outlet hose, anti-drip 13mm o/d 90 , drain down and nozzle storage facility. Designed to fit those awkward to access filler points with a minimum i/d of 14mm. 2” BSP male thread. Pumps on down stroke. Designed for use with trolley A1083/SLB. ° spout J9022 For 20/25Ltr containers. Suitable for gear and all lubricating oils. J9022/S J9022 pump supplied with ‘S’ (J2650/S) adaptor (fits most male threads). Piston Pump Suitable for lubricants, cellulose thinners, industrial solvents, chemicals cleaners and detergents. Nylon suction tube, steel nylon coated rod, viton seals. Check suitability for product before using. J3010/25 For 20/25Ltr containers. 500mm suction tube. J3010/205 For 205Ltr containers. 1000mm suction tube with 2” BSP adaptor. Note: 20/25Ltr supplied with either A or B adaptor. (Please specify or choose from the adaptors on page 18 supplied at extra cost). Robust Heavy Duty Oil Pump With 1.5m flexihose, valve and nozzle. Suitable for SAE 90 and heavier oils. Ideally suited for pumping heavy gear oil in cold climatic conditions. * Other adaptors available at extra cost. (See page 18). A1064SE For 20/25Ltr containers. Supplied with 2” BSPM Bush (P1734/G).* A1066SE For 60 to 205Ltr barrels. Supplied with standard 2” BSP adaptor. Hand Operated Jumbo Semi-Rotary Pump Cast iron, double acting with bronze vanes. For use with water, diesel and lubrication oils. Accessories: Inlet tubes, hose tails, hose and adaptors. K0 1/2” BSP Inlet/Outlet. Flow rate 12Ltr/min. K1 3/4” BSP Inlet/Outlet. Flow rate 22Ltr/min. K2 1” BSP Inlet/Outlet. Flow rate 28Ltr/min. K3 1 1/4” BSP Inlet/Outlet. Flow rate 40Ltr/min. K5 1 1/2” BSP Inlet/Outlet. Flow rate 50Ltr/min. NB: For other Thread Adaptors or Converters see page 18. J9022/TS J9022 pump for trisure threaded drums. J9022/61 J9022 pump supplied with a DIN61 Adaptor (female to female adaptor)